Best guitar VSTs 2024: guitar plugins and software to supercharge your guitar recordings

Recording guitar at home is not the dirty word it once was. Such has been the improvement in amp simulators and modelers over the years that more and more guitarists, producers, and mix engineers are taking to going fully ‘in-the-box’. Nowadays the best guitar VSTs are nigh on indistinguishable from the real thing and packed with features that would cost you tens of thousands to replicate in the real world.

Okay, so a super-experienced guitarist might be able to say ‘that’s not a real amp!’, but your average listener is never going to know the difference. When using a guitar plugin alongside an actual amp recording - as is often the case where time is short in the studio - it can actually benefit your recordings, instantly offering you different flavors of tone to thicken up your recorded one.

There are also loads of great effects you can use too. Some standalone, some bundled with amp models. With the majority of them, you’ll be able to apply automation to all of the parameters and there are some with feature sets and routing options that just wouldn’t be possible within the constraints of a regular stompbox.

There’s never been a better time to go digital, that’s why we put together this list of the best guitar amp and effects plugins to help you improve your productions. If you’d like to learn more about guitar VSTs, check out the buying advice section at the bottom of this article for more info. Otherwise, keep scrolling to see the best guitar plugins available today.

Best guitar VST: Our top picks

It was a hard-fought battle for the top spot of this list, there are so many amazing plugins out there right now, but we’ve decided to go with IK Multimedia’s Amplitube 5. It packs in an incredible array of amp models and effects, with official models from Fender, Orange, and others to assure you of its quality.

Coming in a close second, we went with the much-heralded Positive Grid BIAS AMP 2. It has some of the best sound quality we’ve ever heard from an amp sim and loads of great effects too.

Best guitar VST: Product guide

IK Multimedia’s original Amplitube was one of the trailblazers in amp and effects software. Twenty years later, it has come a long way and Amplitube 5 proves IK Multimedia is still ahead.

The options here are staggering – with not only a wealth of stellar amp and effects but features for writing and performance too. But for this latest version of Amplitube, V.I.R Technology is a notable evolution; it offers millimeter-accurate virtual mic placement, culminating in 600 Impulses per speaker to completely re-shape tonal response and character far beyond EQ tweaking.

Of course, amp and effect models are the main course here and all the classics are covered here, with new amps including PRS Archon, Friedman Pink Taco, Bogner XTC, and Diezel VH4 and an intuitive drag and drop signal chain delivering limitless tonal possibilities.

Read the full IK Multimedia Amplitube 5 review

If Positive Grid wasn’t the first to bring amp sims to DAWs, they’re certainly the ones that have made the biggest impression. Now in its second iteration, the Positive Grid BIAS AMP 2 brings more of the features and tools that guitarists love into what we believe is an incredibly useful package.

The premise is that each individual component of an amp’s signal chain can be tweaked, changed or replaced. Everything, right down to the type of transformer, or the pre-amp tubes, or even how hot you run the tubes, is up for grabs. If you can’t get a good tone out of this sim, then amp sims probably aren’t for you. We particularly loved the higher gain tones. These are often a barometer of how good an amp sim is, yet here they stood out superbly in our mix.

The BIAS AMP 2 doesn’t include any effects other than a basic reverb – they come in a separate package. However, this is balanced by the inclusion of an Amp Match feature, which we loved. Essentially, you give it an amp sound, either from your playing or from a recorded track, and using its multitude of variables the sim will attempt to match it, usually to a decent level. Well worth checking out.

Read the full Positive Grid BIAS AMP 2 review

Already a legendary guitar processing workstation in its own right, Native Instruments Guitar Rig 6 Pro sees the software get a serious update. Guitar Rig has a reputation for doing things a little differently from other, more traditional amp sims, with an emphasis on sound design and creative expression rather than painstaking hardware emulation.

The new GUI is rather nice to look at, offering several improvements to the previous iteration. It’s now resizable, super handy when you’ve got massive chains of devices, and there’s a brand new library that takes inspiration from the NI Maschine, letting you search presets by the nature of the sound itself.

Soundwise there’s so much here that it needs a whole article on it. We loved the Bite and Dirt modules, which can be used for warm saturation or all-out audio destruction. There’s also a great selection of modules from Komplete 12 like compressors and some great IR reverbs. Tie in a selection of classic and modern amp heads and cabinets, and you’ve got some serious depth on offer.

The Neural DSP Tone King Imperial MKII is one of the finest tube amp simulations we’ve ever heard. Neural have been making waves of late with its super accurate amp sims, and the Neural DSP Quad Cortex got a full five stars in our review. Based on similar tech, Neural’s standalone plugins do a similarly excellent job of conveying natural guitar tones.

The layout is as simple as you can get really, looking exactly the same as the real deal, the Tone King Imperial features two channels, EQ controls, and built-in reverb and tremolo for adding depth and breadth to your sound. Extra versatility is offered by the outboard EQ, a selection of post and pre-stompboxes, and the mic placement page with 8 classic mic emulations to choose from.

As far as we’re concerned it’s one of the best clean amp sims we’ve ever heard, the perfect platform for adding other effects too. It does that tube edge-of-breakup thing wonderfully, and you can really push it to full-on saturation on the drive channel too. Combined with a fine mic selection, two IRs for speaker choice, and the ability to load your own IRs, this is the perfect plugin for vintage guitar tone lovers.

Softube’s Amp Room is designed to give you realistic-sounding guitar amp simulations quickly. In fact, so good are the Softube emulations that Marshall amps decided to partner with the firm, using their emulations in their own modeling amps and letting Softube recreate a host of classics.

With a drag-and-drop GUI, it’s pretty easy to start creating your own chains in an intuitive way. Everything is laid out logically, so you can see and edit your full signal chain at any time. To save space when you load in an amplifier, it shrinks down to pedal size with the basic controls, great for when you’re working on a smaller laptop screen.

In terms of sounds, there are some hyper-realistic options here, particularly with the Marshalls. If you want high gain that’s covered, and there are some great clean tones too. Another interesting feature is the ability to use your other Softube plugins, alongside the built-in EQ, compressor, and room IRs.

Okay so this isn’t strictly a guitar VST but hear us out, Soundtoys Effects Rack makes for an absolutely amazing virtual pedalboard and even better, makes sure your recorded guitars sit perfectly in the mix. Realistically no producer should be without some of these plugins, even if you’re not a guitar player.

Effects Rack is laid out very intuitively and quite literally, with everything sitting visually in a nice-looking rack unit. Drag and drop the modules you want into the chain, reordering and tweaking parameters using the knobs and dials. There aren’t loads of submenus here which is handy, the majority of controls are right there and ready to rock.

Use the Crystallizer to add pitch shifting and granular reverse echoes. Or the Tremolator to add subtle or warble, or full-on beat-synced rhythmic chops. With classic effects like the EchoBoy delay unit and PhaseMistress, there’s no shortage of inspiration here to refresh your guitar tone. If you haven’t tried the Decapitator yet then get ready, that thing’s going on all your mixes from now on.

When we heard that one of our all-time favorite reverb pedals was getting a plugin we couldn’t wait to get our hands on it. The Strymon BigSky Plugin represents the company's first dive into the box, and it’s no surprise really. The BigSky pedal is so good that it transcended traditional guitar players, finding use in studios all over the world as an outboard effect.

If you’ve ever used the pedal then the layout will be immediately familiar. Unlike the pedal however there are no submenus here, everything is located on one screen and within easy reach. It’s super easy to use, and it won’t be long before you’re dialing in everything from immense shimmer verbs to natural room reverbs.

In terms of sound, we’d say it’s pretty much indistinguishable from the pedal. If anything the plugin feels a touch more reserved than the guitar pedal, which may be due to the use case for each. It does the basic reverbs well, as you’d expect, but there are some spectacular sounds in the Bloom, Cloud, and Shimmer algorithms.

Considering the cost of the actual delay pedal, the Eventide UltraTap plugin is fantastic value for money. Consisting of some rather unusual delay sounds, it’s a great tool to have in your arsenal when you need something beyond a classic tape delay emulation.

All of the controls are present and accounted for in one screen, so need to deep dive into menus. That doesn’t mean there isn’t a tonne of flexibility on offer here, however. You might notice there’s no ‘feedback’ control as you’d normally expect, instead this is replaced with ‘taps’, Eventide’s unique way of controlling delay feedback.

UltraTap is great for some out-of-this-world delay sounds. You can add drive to your delay tails, comb filtering effects, swells, and plenty more. The ‘slurm’ control gives you modulation and pitch-shifting effects, resulting in a multi-voiced, detuned style delay that sounds absolutely phenomenal.

With a name like Chris Lord-Alge behind it, the CLA Guitars plugin from Waves Audio was bound to come with a certain level of quality. As a pared-down amp sim, this delivers a relatively small selection of guitar-specific tones, but what is there sounds fantastic.

You get three ‘channels’ - clean, crunch and heavy - and a small selection of effects, so there isn’t much in the way of experimentation on offer. But if it’s a quick and easy way to achieve the high-quality guitar sound you’re after, this could be your guy.

Blue Cat’s Axiom follows up their sleeper hit Destructor, offering some massive improvements in both sound, GUI, and routing flexibility. If you’re the type of player who isn’t in the market for vintage tube amp recreations, then this versatile plugin might be the one for you.

One of the best things about Axiom is that you can configure your signal every step of the way. Add any of your effects or plugins on the input stage, which goes into a pre-amp pedalboard where you can add six more stompbox effects. You then get to your amp with its own customization options before the post-FX, then finally the output where -you guessed it - you can add further effects and plugins.

The amp models sound awesome and thanks to the flexibility of the input and output stages, you can dial in pretty much any sound you like. The amp section - based on Blue Cat’s Destructor - gives you anything from vintage analog amp tone right through to hard clipping and bit crushing, so you certainly won’t be short of options here.

Waves’ GTR3 software originally came priced at north of $400 with its own Waves DI box. Thankfully Waves now offer the plugin as a standalone, and at the time of writing you can find it for less than $30, which is less than some single plugin's cost.

The plugin can be split into different sections, so if you only want to use the pedals or the amp separately, you can do that. The GUI is showing its age a little in terms of graphics, but it’s nice and easy to set up and get running. You can run amps in stereo or mono, adding various cabinet and studio microphone options.

In terms of amp models, everything is how you’d expect, you’ve got your clean, driven, and high-gain models, as well as some for bass guitar players. The stompboxes are fairly basic, with all the classics represented like the tube screamer, octave pedal, reverb, and delays. It’s very utilitarian but for the producer who’s making tracks that don’t feature guitar front and center, it certainly gets the job done.

Best guitar VST: Buying advice

Similar to amp simulators or modelers a guitar VST allows you to get great guitar sounds from the comfort of your DAW. However we’ve not limited this article just to amp simulators, so you’ll find some plugins that are just standalone effects and even a couple that aren’t specifically designed for guitar.

Related buyer's guides 

• The best guitar audio interfaces for recording guitar at home
• Our pick of the best vocal plugins
• The best studio monitors for music-makers
• Spend less with the best budget audio interfaces around right now
• The best studio headphones, for music production, whatever your budget
• The best in-ear monitors: IEMs to suit all budgets