MusicRadar

A firm favourite.

View in gallery

• Review
• Manufacturer's Description

Back in the early nineties, Fender's guitar amplification line was in danger of running out of steam. Following the closure of the legendary Fullerton facility and with it, the last of their hand-wired production models, Fender's lacklustre range at that time was losing market share to competitors who were already exploiting a trend for vintage tweed styling, combined with contemporary features.

Hence the debut of the original tweed Blues range in 1993, which saw Fender rightly asserting that if players wanted a real tweed amp, then its was the only name that should be on it. These amps have since evolved into the hugely popular Hot Rod range, with the addition of the 'More Drive' button. However, there are many players who still crave the fatter, warmer tone of the earlier version, and Fender has now reissued the two most popular circuits in the original format: the 40-watt Blues Deluxe and the 60-watt Blues Deville.

With all due deference to the company that basically invented the guitar amplifier, original Blues Deluxes and DeVilles weren't among the best-made amps that Fender ever produced. Like most other volume manufacturers, in the early nineties, Fender was struggling to find consistent and reliable valves, and this caused many units to suffer from excessive mains hum and erratic performance.

Amp evolution

UK models were also prone to overheating mains transformers, which often exposed dry solder joints or other component weaknesses over time. However, a lot of electrons have passed under the bridge since then and the build standard of these reissued versions is considerably improved.

The tough-ply cabinets of both amps are neatly covered in real tweed cloth, which combined with the chrome control panels and chicken-head knobs certainly evokes the vintage Fender vibe that's still so popular today. The un-lacquered tweed covering may be a little bright for some eyes, but for those who want a more worn look, it's also thankfully very easy to 'relic', using thinned matt varnish to dull and darken the fabric to taste.

Inside the steel tray chassis, most of the electronics are contained on two robust circuit boards which are double-sided and through-plated; the valves are chassis mounted, with long-tailed bases connecting to the PCBs, and all of the wiring is neatly bundled and tied back.

Both amps have identical control panels featuring dual high- and low- sensitivity inputs feeding either a single volume control for the normal channel, or drive and master volume controls for the overdrive channel. Both channels share a standard three-band EQ, as well as presence and level controls for the amp's built-in reverb spring, while a pair of sockets labelled preamp out/power amp in serve as a useful series effects loop. There's also a normal/bright switch that boosts high-frequency response – a handy feature for guitars with high-output humbuckers.

Apart from mains and loudspeaker connections, all the controls, switches and jacks are mounted on the top surface for easy access, including a socket for the supplied two-button footswitch, although to get at the valves it's easier to remove the rear panel, which has a CE-approved steel grille protecting the 6L6s from clumsy fingers.