MusicRadar

The Singlecut features natural wood edge binding

View in gallery

• Related News
• Review

PRS and Gibson's legal dispute over the similarity of the PRS Singlecut to the iconic Gibson Les Paul has dominated guitar news over the last couple of years.

And now that the USA Singlecut is back in production another battle is about to happen in the lower market area thanks to the release of the Korean-made Singlecut SE.

Overview

The third maple-topped SE so far, behind the SE Soapbar II Maple Top and the SE Custom, the SE Singlecut is the first SE to emulate PRS's fabled carved maple top.

Like the SE Custom, what we have here is a plain slab of maple topped with a nicely figured maple veneer that's primarily a flat top, but the generous edge chamfering is rounded to create – as on the existing Tremonti SE – a faux carved top.

It might not look as elegant as the carve on a USA Singlecut but at less than 25 per cent of the USA model's price that's acceptable.

And unlike the Tremonti SE, which has a plastic bound edge, here we get PRS's natural wood edge binding as on the SE Custom.

But the interesting thing about this guitar is that it isn't a direct copy of the USA model. Firstly, the overall body depth is a lot thinner – 45.5mm as opposed to the 57mm depth of the USA model – and more like a Custom depth, so the all important maple/mahogany ratio is therefore different to a real Singlecut.

Here the maple top is approx 13mm thick, leaving the mahogany back wood around 32mm thick as opposed to the 15/42mm maple/mahogany ratio of the Singlecut.

So from the off, this SE Singlecut is more like a single-cut Custom in terms of its apparent bulk. It has immediate impact on the feel. Not only is this sample a perfect 8lb weight, it feels more delicate than the bruiser-like Singlecut or, indeed, the Les Paul.

As with all SEs, the neck carve approximates the USA wide-fat profile but it is slightly slimmer in depth and, like the overall body, feels more delicate than the USA carve. Some will prefer it.

It still captures a slightly 'V'-d section and feels very good, irrelevant of any comparison. Fretting, from a slightly lower section wire than that used on the USA model, is very tidy, and even the fingerboard edges are slightly rounded to approximate the feel of the USA necks.

Another US feature are moon inlays (although they are not available on a USA Singlecut, it's either dots or birds) and where so many single-cut guitars in this price bracket go for a bound fingerboard this one is typically unbound: less complicated to make and better for it.

The rounded heel replicates the USA model, as do the slight ribcage contour and generous rear edge radius.

Inside the treble cutaway there's a very smooth line from the body into the neck – actually neater than this writer's USA model – and overall finishing is razor sharp, not obviously thicker than the USA process though presumably just polyester, not the polyester base coat/ acrylic top coat blend of the US model.