Waldorf Lector

Waldorf's in-demand synth engine allied to a multiband vocoder

Waldorf has enjoyed a fruitful few years, with their Blofeld synthesizer an FM favourite and the software equivalent, Largo, providing similar features in DAW-hosted form.

Its latest product takes a sideways step, offering comprehensive vocoding with the Waldorf synth engine at the heart of the carrier signal. Available for Mac and PC, Lector is its name.

"It does classic vocoding beautifully, turning drum loops into pulsating pads and dreamy atmospheres."

Authorisation is carried out via a license transfer to eLicenser USB, or through the 'soft' eLicenser option. Thereafter, you'll find yourself with both 32- and 64-bit versions of the plug-in at your fingertips.

There are a number of ways in which Lector can work, depending on the plug-in type and DAW you're using.

We tested in Logic, and here Lector is run most effectively as an AU MIDI-controlled effect with the vocoder signal routed in via the sidechain input. Even then, it's worth selecting 'Normal' mode from the preset drop-down menu to provide a good starting point.

Getting analytical

Lector's GUI is divided into four main sections, with input signal analysis covered by the grey panel in the top left-hand corner. This enables you to choose settings for the Speech signal to be vocoded, with an additional Unvoiced Detector available to add three variations of noise to the analysis signal.

A built-in compressor allows for dynamic reduction of the input signal, with a Ratio control to select compression amount and Gain to tailor output volume. Underneath is the main Synthesizer section, or carrier source, which features two oscillators with variable waveforms and PWM.

There's a dedicated Legato mode with a glide control, an LFO with syncable clock speeds and rich, mind-bending ring modulation, a multi-mode resonant filter plus three brands of emulated tube 'Drive' and envelope control over the tone and amplifier settings.

In 'Normal' mode with no sidechain signal set, it's perfectly possible to use Lector as a synthesizer alone, and exploring the synth options before applying your findings to Modulator sources often leads to better sounding results than diving straight into full-blown vocoding.

Our only gripe is that the GUI's choice of colours and text shading make it less than easy to read and until you're familiar with where things are, expect to do some squinting.

A century of bands

Up to 100 analysis bands are available to Lector, with more bands equating to a greater resolution of signal analysis and therefore, more transparent results, unless you choose to warp this transparency with more extreme synth settings.

Above the real-time readout, you can tailor the vocoder's response via dials controlling Low and High levels, Attack and Release times and Bands. Beneath the read-out you'll find the Synthesis Filter Bank, providing Low and High offset dial controls, plus those for global resonance and bandwidth.

One of our favourite features with all vocoders is the ability to 'squeeze' the analysis signal's frequency response into a narrower, vocoded one, yet Lector does this better than most vocoders we've tried, providing rich, crunchy results simply by moving the red 'L' and 'R' tags below the analysis signal inside the range of the white ones above.

This is particularly effective if you want biting synths or drum parts and, combined with the Tube overdrive options, enables Lector to stop sounding like a vocoder altogether, instead coming across rather like an unusual, but welcome, set of effects plug-ins.

Beneath these controls are modulation and EQ sections for the Filter Bank, the latter of which is very welcome.

Vocoders are often resonance-rich, which works wonderfully on vowel-like sounds in the upper-mid range, but can lead to overloading of analysed bass content, with kick drums often overloading vocoders dramatically.

If you're working on a beat loop and want to tailor bass response, Lector enables you to - adding further control with a sweepable 'mid' EQ control.

Built-in effects processing goes much further though, with dedicated Overdrive, Chorus, Delay and Reverb sections occupying the panel on the right. These offer surprisingly detailed parameter sets, with the Overdrive section delivering three 'types' plus Drive, Post Gain and Tone dials, Chorus offering two-, four- or six-stage options with Speed, Depth and Feedback controls and Delay providing syncable or free operation, with Time, Mix, Feedback, Spread and EQ dials.

The Reverb section doesn't offer multiple types but does provide Size, Mix, Diffusion, Decay plus EQ Cut and Damp options, so again, it's easy to match spatial characteristics to the sound you're building.

Output controls = musical options

One thing we particularly like about Lector is rather an understated feature. In the top right-hand corner, as well as the main 'Vocoder' output, you'll find additional controls for Speech and Carrier.

When vocoding in the 'traditional' way, you won't need either of these to have an active level, as the Speech knob controls the source file being vocoded, while the 'Carrier' is the synth engine manipulating this source.

However, by turning these dials up, you can hear the 'dry' sources and as they can be automated, some great things can be achieved.

For instance, if you want to experiment with adding clear voice harmonies under a vocal part, you can balance the harmonies you program with the original lead vocal simply by turning up the Speech dial.

Equally, if you want to add more 'rasp' and power to the vocoded synth signal, turn up the Carrier.

Vocode verdict

All in all, Lector is a comprehensive vocoder whose breadth of sounds is as you'd expect from such a feature-rich control set. Needless to say, it does classic vocoding beautifully, turning drum loops into pulsating pads and dreamy atmospheres while also offering robot voices aplenty for those of a sci-fi vocal processing bent.

However, it also goes further, taking almost any file you can imagine and doing something useful to it, with clanging, bell-like overtones a particular forte.

The ring modulator is wild, with total mayhem just a few knob-turns away, though more subtle treatments are also perfectly possible. All of which means that Lector comes high recommended, not only for those needing a quality vocoder but for producers with an ear for specialist sound design.

MusicRadar Rating

4.5 / 5 stars
Pros

Thorough parameter set equals wide range of textures. Ring modulator is wild! Up to 100 bands of signal analysis.

Cons

GUI can be tricky to read.

Verdict

Rich vocoding, instant-harmonising and true sci-fi mayhem all await your command.

Description

Vocoder based on the Waldorf synth engine

Review Policy
All MusicRadar's reviews are by independent product specialists, who are not aligned to any gear manufacturer or retailer. Our experts also write for renowned magazines such as Guitarist, Total Guitar, Computer Music, Future Music and Rhythm. All are part of Future PLC, the biggest publisher of music making magazines in the world.

Comment on Facebook