Carvin NS-1

Nylon string electric/MIDI guitar

Think Carvin and it'll probably conjure images of Steve Vai and his signature amps, or perhaps the Frank Gambale and Allan Holdsworth signatures we looked at last year. But, yes, as this NS-1 proves, Carvin makes guitars with nylon strings, too.

Of course, nylon-string guitars are a no-go area for the vast majority of us still traumatised by those cheap 'classical' guitars we learned on back in school. But the NS-1, like Godin's Multiac nylon-string guitars, is about as far removed from those models as it's possible to be. Add in a fully featured hexaphonic pickup system and active EQ, not to mention a 13-pin DIN output to hook yourself up to a synth, and you have a very different guitar.

Build

"Aside from the classical-style headstock and tie-block bridge, there's nothing here that references the classical guitar"

Aside from the classical-style headstock and tie-block bridge, there's nothing here that references the classical guitar. Construction-wise, for example, we have a mahogany thru neck, with chambered wings topped with a finely flamed maple cap.

Its outline references a Telecaster, not a Torres; the ebony 'board has very electric-like medium gauge frets and a 'semi flat' fingerboard radius of 508mm. In classical-style, the fingerboard face is marker free - thankfully, though, we have electric-like side dots from the 3rd to the top 21st fret.

Compared with a classical's 50mm or 52mm nut width we have a far more manageable 48.6mm width, while string spacing at the bridge is Fender electric-like at 55mm. The neck profile is a finely shaped, slightly flat-backed D that should feel comfortable played in either thumb-around or more traditional thumb-behind positions. In fact, picking this out of its hard case, there's a definite steel-string-meets- nylon crossbreed feel.

It's all beautifully made and finished in a high-quality style that's typical of Carvin's detailed build. The finish is super glossy but clearly thin: you can see the undulating ripples of the flame maple top through the finish. Weight-wise, it's tubby compared to a lightly built classical instrument but very lightweight for an electric.

Three stacked gold-plated knobs take care of business with MIDI/piezo volume, and centre-notched treble and bass cut/boost, mid cut/boost and sweep. A mini toggle momentary switch changes synth patches, and along with the standard jack piezo output there's the necessary 13-pin socket to access the world of MIDI. This well spec'd preamp is provided by Graph Tech, along with the hexaphonic piezo pickup mounted in the ebony tie-block bridge.

Sounds

With an obviously small acoustic voice, plugged in the NS-1 possesses a clean, clear and fairly uncoloured nylon tone. There's noticeable piezo snap if you dig in, but with careful use of the midrange controls and a slight treble and bass lift the guitar sounds pretty convincing, with quite a bit of thump in there for percussive styles.

It certainly has a reduced dynamic range compared with a more standard cutaway electro, but then it plays much more like an electric. The NS-1 is impressively feedback-resistant - a good choice for louder gigs, especially with a full band.

Carvin's detailed, considered build is perfect if you need a pro-quality nylon- string for your louder gigs where a more standard electro-acoustic doesn't cut it. It's a beautiful guitar and very practical with it.

MusicRadar Rating

4 / 5 stars
Pros

Great if you need nylon tones for big gigs. Beautifully made. Feedback resistance.

Cons

Will anger your purist friends.

Verdict

Beautifully made nylon stage electro-acoustic with Synth Access and superb feedback resistance.

Pickup

GraphTechhexaphonic pickup with Graph Tech preamp

No. of Frets

21

Scale Length (Inches)

25.5

Country of Origin

USA

Hardware

Classical-style 3-a-side tuners, gold-plated with white pearloid buttons. Ebony tie-block bridge

Weight (lb)

5.94

Left Handed Model Available

Yes

Neck Material

Mahogany, thru neck style

Top Material

AAAA grade flamed maple

Nut

Graph Tech Tusq/48.6mm

Unique Features

Stacked volume control (synth/piezo) stacked treble and bass cut/boost, stacked mid-cut/boost and sweep. Outputs for piezo and 13-pin hexaphonic MIDI-compatible output

Scale Length (mm)

648

Weight (kg)

2.7

Fingerboard Material

Ebony

Guitar Body Material

Chambered Mahogany

Available Finish

rans Red with natural mahogany neck, back and sides. Large selection of colours, see website

Review Policy
All MusicRadar's reviews are by independent product specialists, who are not aligned to any gear manufacturer or retailer. Our experts also write for renowned magazines such as Guitarist, Total Guitar, Computer Music, Future Music and Rhythm. All are part of Future PLC, the biggest publisher of music making magazines in the world.