You might want to turn the main volume on the synth down by about 7dB to prevent overloading. So farwe have a nice, chunky chord sound, but let’s add that signature filter modulation to give it a classic Progressive House edge.

In the modulation matrix, set up a chain with an LFO as the source and the filter cutoff as the destination, with a depth of about 35%. Set said LFO to Sync with a downwards saw waveform at a rate of 1/8. You’ll want to pull the filter cutoff down to about 2kHz to get the right sort of pluck. You can brighten the sound a little by then setting the same LFO to control the filter resonance with a depth of about 50%, and if you drive the filter distortion by about 20% you’ll get an added thickness too.