SE Electronics SE2200T
sE Electronics' 2200A cardioid condenser mic has been a massive success, and rightly so.
The combination of a crisp top end, robust construction and packaging and, of course, excellent price, is hard to beat. So it should come as no surprise that the company has finally reworked the 2200 into a valve-based version: the SE2200T.
As you would expect, there are plenty of similarities. First up, the capsule is the same one-inch single large diaphragm, centre-tapped design with fixed cardioid pattern. Also familiar are the 10dB pad, 100Hz optional low-cut filter and transformer-based output stage. But beyond that, the requirements of the valve design mean different internal electronics.
The valve is a SE-badged ECC83A and the mic power and audio is handled via a seven-core cable from the SE T1 external PSU. You'll find a standard XLR audio output on the PSU unit.
From a technical perspective, the various differences haven't affected the frequency response too much, with the same characteristic lift as the 2200A around the 10kHz mark. However, the SE2200T's self-noise, sensitivity and maximum SPL handling have been improved along the way.
It may not be the most visually-stylish mic out there, but you can't fault the build quality of the 2200T, and when you're done recording, everything packs away into a sturdy flight case. It's always good to see a robust suspension cradle thrown in for free - the only thing that may annoy some is the lack of a standard mic clip.
Sonically, the 2200T has a modern sound with a slightly-hyped top end. This makes it a great general-purpose mic, but particularly good for vocals, acoustic guitars and anything where you want to add a bit of 'air' at source.
Like all cardioid mics, the pattern is frequency dependent, and for mid-range sounds this is pretty broad, narrowing in the top-end. In use, we found this made positioning easy, which is ideal in a budget mic.
As far as the tube aspect is concerned, it's the transients that really benefit, with the tube circuit rounding off and introducing subtle harmonic distortions. Inevitably this is content-dependent, but you'll spot benefits on vocal articulations and plosives and pretty much any percussive sounds, plus a more rounded performance with low frequencies.
Overall, the results are definitely more coloured than a solid-state design, but that can be desirable. If we were planning to use the mic predominantly for vocals we would definitely opt for the valve version ahead of the solid-state SE2200A. However, for drum overheads or room mics, on sound alone the SE2200T would be more up our street.
Overall, the SE2200T has the same excellent combination of features and value as the 2200A, but the valve design means a more engaging sound. Like the 2200A, there's no single astonishing thing about this mic - the combination of features and price are the selling point.
The added complexity of using a valve PSU can be awkward at times, but on the upside, you know the underlying design has a good track record. It's very difficult not to conclude that this is a great buy.
Engaging valve sound. Great value bundle. Proven mic manufacturer.
Needs an external PSU.
All the sonic tuning of its sibling but with extra colouration. And all for an excellent price.
All MusicRadar's reviews are by independent product specialists, who are not aligned to any gear manufacturer or retailer. Our experts also write for renowned magazines such as Guitarist, Total Guitar, Computer Music, Future Music and Rhythm. All are part of Future PLC, the biggest publisher of music making magazines in the world.
Specs: Frequency Response: 20Hz-20000 Hz Sensitivity: 22mV/Pa Capsule: single diaphragm, centre-tapped, ﬁ xed cardioid pattern Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD@1000Hz: 130dB Connector: 7-pin