Godin xtSA review

  • £1044
  • $1255

A 'three voice' guitar: acoustic, electric and synth control

Image 1 of 2 Godin xtSA
Image 2 of 2 Godin xtSA
The xtSA has RMC bridge transducers enabling the guitar to provide acoustic sounds

Our Verdict

Not all players need synth access, it's here if you want with acoustic and electric voices. A do-it-all from Montreal!


  • Well-organised control over all three sounds; fast synth tracking; unlimited potential…


  • You need a synth to unleash its full potential!
Buying options

Godin may not be as well known in the UK as some of its North American counterparts but, over the 20-odd years since the company was founded, it has become a respected brand admired for its innovation.

The stated goal is to find the perfect balance between the finest traditions of guitar crafting and new design concepts and the company has, for example, been at the forefront of building guitars that offer acoustic tones from bridge transducers alongside the standard electric sounds.

The xtSA is a showcase of Godin's design ethos: a 'three voice' guitar that not only has electric and acoustic sounds onboard, but also functions as a synth controller via a standard 13-pin output that will connect to a Roland guitar synth or others that use the same protocol.

With all the controls needed for the three voices there is the potential for confusion, but Godin is well practised and has created a user interface that is uncluttered and easy-to-use with a combination of 13-pin output plus two jacks that allow either mixing or separation of electric and acoustic sounds.

Electric guitar sounds are governed by volume and tone knobs, plus a pickup selector, while four small sliders (volume, bass, middle and treble) control the acoustic part of the sound. For the 13-pin output there's a three-way toggle switch that selects synth only, audio only or a blend of the two, with the volume of synth sound in the mix being controlled by an adjacent knob. A non-latching toggle switch is used to step through the patches on any connected synth unit.


This guitar is all about versatility with the electric pickups providing the full range of Gibson and Fender-like tones that might be expected from a H/S/H combination. The acoustic-like tone is both jangly and full with plenty of available tonal variety and does a convincing enough emulation of a modern, bright acoustic for onstage use.

As for the 13-pin output, the tracking is excellent with instantaneous response, which is all you could hope for - the synth sounds are up to you!

For the ultimate in versatility, though, the xtSA is a guitar for those of you who need a large variety of sounds on a single gig, but can't take several guitars. There are other alternatives, of course (you could fit a hex pickup to a favourite guitar and use a Roland VG system), but the xtSA is an elegant solution that not only does a lot on its own, but can also directly interface with a VG system for ultimate flexibility. It also has great potential for sculpting hybrid tones - a great asset in the studio.

Tech Specs

Available FinishLightburst (as reviewed), trans red and trans black
FeaturesThree-voice single-cutaway solidbody electric; Silver Leaf maple centre with poplar wings with a flame maple 'leaf top'; mahogany bolt-on neck;
Fingerboard MaterialEbony
Neck MaterialMahogany
No of Strings6
Scale Length (Inches)25.5
PickupTwo Godin humbuckers (GHN1 at neck, GHB1 at bridge), Godin GS1 single-coil (middle), five-way lever pickup selector, master volume and tone. Bridge fitted with RMC transducers, custom preamp with volume and 3-band EQ for acoustic sound plus volume, three-way mix selector and program change switch for synth output. Three outputs – electric, acoustic/mix, 13-pin for Roland GR synths etc