MusicRadar

The 5000 looks like an MPC, and feels like one too.

1 of 3 » View in gallery

• Related News
• Review

Sequencing

There's a fully-featured sequencer in the MPC 5000. A sequence can contain any type of MIDI event (synth/drum/MIDI) and edited in fine detail in step edit mode or via the piano roll/DAW-like grid editor. This is fine, though a mouse input/VGA output (as you'll find on the Roland MV-8800) would have made it even better.

Each sequence can have up to 64 tracks, and sequences can be easily chained together in song mode to create an arrangement. Whole tracks can now be assigned/triggered or muted by one or more pads (groups) in the track mute screen, which is amazing for live use.

You'll be glad to hear the much-debated swing-quantise function is still fully intact, and now comes with added strength and triplet parameters. The sequencer feels tight and accurate, though in direct comparison, our beloved MPC 3000 still has the edge both in terms of sonic punch and feel/ swing.

A useful new feature called Continuous Sample Tracks ensures that long samples start from the correct point in their cycle each time play is pressed, so no more waiting for the measure to come back round before the sample re-triggers.

A significant downside with the 5000 is that its sample rate is fixed at 16-bit/44.1kHz. Most people now work at 24-bit in their DAWs and the extra digital headroom would definitely have been welcome. It's strange that Akai has chosen a 16-bit upper limit, especially when you consider that the MPC 4000 was fully 24-bit/96kHz capable.

The MPC 5000 allows eight tracks of live audio to be recorded/streamed from/to its hard drive and these can be added to a song and edited (but not with quite the ease DAW users are used to). Recording time is only limited by the size of the internal 80GB hard drive – unfortunately, you can't currently record or stream to/ from an external USB hard drive which is a big missed opportunity.

Audio can be edited, automated and panned in the track mixer and mixed down with effects/mastering. This means that complete songs - with beats, synths, effects and audio – can be finished and mixed within the MPC and burned to CD/DVD (if you have a drive installed).

The MPC 5000 sounds great for drums in particular and is clear, wide and punchy. However, the synth can sound slightly harsh/grainy in the mid/hi-mid range at times, (though the effects/EQ/compression can temper this and are very useful additions). However, we did notice some aliasing on the tails of certain delays and also stepping/ quantisation while using the filter. This is disappointing, though the synth certainly adds to the MPC's viability as one-stop production centre.

Summary

While it's lacking some features from Akai's last flagship MPC, the 5000 strikes a good balance in terms of sounds, looks and features. It's great to have all the extra real-time control, hard disk recording, a synth/arpeggiator, effects, a fast USB 2.0 connection and sequence grid/sample waveform editing on a larger screen.

At this price, though, we really think that the MPC 5000 should have a 24-bit sample engine, a DVD/CD-R burner as standard, and more polyphony and RAM. Also, the keygroup function on the 4000 that enabled multi-sampled instruments to be imported appears to have been lost, which is a real shame. It's almost as if Akai is giving up some of the 'high end' features in favour of more, raw sound-producing options.

So, while this box is more than worthy of wearing the MPC badge, the loss of 24-bit support alone means that most dedicated MPC 4000 users will be hanging on to theirs for dear life – at least until a similarly high-definition MPC 6000 arrives. As good as the 5000's new features are, in terms of digital recording this feels more like an MPC 3500 than a new flagship.