MusicRadar

The traditional POD 'kidney bean' shape has gone

1 of 4 » View in gallery

• Review
• Manufacturer's Description

Line 6's Floor POD combined a useful range of amp models and effects in a compact pedalboard unit.

It was ideal for players who needed a POD-based set-up on stage but who were reluctant to explore the depth and complexity of the PODxt Live.

The gulf between the two products was still quite wide, though, and the new Floor POD Plus looks like filling that gap nicely. The emphasis is still on clarity and ease of use, but the increased array of sounds and features brings the Plus into direct competition with a wider range of full-size multi-effects units.

While the original Floor POD looked a bit like a standard POD with an expression pedal added, the Plus version moves away from the familiar 'kidney bean' design and looks like a typical fioor effects unit.

The more conventional dimensions mean that there's now space for five, rather than three, footswitches along with the expression pedal and a larger selection of easy access knobs and switches.

In another move towards standard multi-FX design, the Floor POD Plus can be used in two ways. In channel memory mode, you use the footswitches to select from the 124 available presets (120 of these are initially filled with factory sounds, but you can overwrite any of them).

The first four of the main group of five footswitches are used for selecting the presets in each bank, and there's another pair of footswitches just behind, for scrolling up and down through the 31 banks. By pressing both bank switches simultaneously, you can switch to or from on/off mode.

Here, the first four footswitches function as a row of traditional stompboxes, controlling amp model, solo boost, FX and delay. The effects used in each of these 'virtual stompboxes' can be adjusted with the same flexibility as if the modules were chained together in channel memory mode.

Finally, the fifth footswitch is used for tapping in delay times, and by holding it down for two seconds you can access the built-in tuner.

In use

Just like every other member of the POD family, the Floor POD Plus is very clearly laid out. As usual with Line 6 products, it's unlikely you'll need to refer to the manual.

The beauty of so many of the company's products is that you can set up and start using the full range of functions in minutes.

Immediately above the four main footswitches are three rotary switches, used to select the amp model, effect and delay type.

There are 32 amp models, and they'll be familiar to anyone who has used the 2.0 version of the standard POD.

By pressing down and then turning this switch, you can also select a different cabinet model from the default setting for each amp. There are 16 effect models, covering the range of standard stompbox types found on the original POD along with some more unusual sounds.