MusicRadar

It wasn't built for extreme gain sounds.

1 of 3 » View in gallery

• Related News
• Review

Based on the twin pickup 1956 U-2 model, the ’56 Pro retains a great deal of charm but provides some worthwhile upgrades in the hardware and electronic departments.

Two immediately noticeable deviations from classic spec are the sealed chrome tuners and bridge with adjustable saddles, taking the place of the rosewood-saddle bridge of old. Purists may lament that this detracts slightly from the white-knuckle ride of the original design, but the benefits in terms of both tuning stability and intonation are considerable. Other notable departures include the headstock shape, now a non symmetrical variation on the classic ‘Coke bottle’ outline utilised between 1956 and 1966, and on the later reissues.

The scratchplate is a clear, unadorned affair that lacks the printed stripe and ‘D’ logo found on most U-2 models. This arguably makes for a slightly more sophisticated look overall, and the deep red finish is similarly understated. That said, if you love the candy shop cosmetics of the originals need fear not as there are a range of finishes available. While the Danelectro website details six finish options, baby blue and gold are not currently being brought into the UK.

First impressions upon picking up the guitar and subjecting it to a cursory strum are very positive indeed. There is an appealing resonant quality to the acoustic tonality that is a little rounder and less zingy than the previous reissues, but this concurs with a perceived increase in physical weight. Fretwork is good, with no sharp ends protruding anywhere along the length of the 21-fret rosewood fingerboard.

At the headstock end, the aluminium nut is secured with a small unobtrusive Phillips screw, while truss rod adjustment is carried out at the body end and requires the removal of the five-bolt neck. You may find that the aluminium nut will wear quicker than a graphite or even plastic nut, but in the event of this occurring, a nut upgrade is hardly major guitar surgery.

Around the back of the body, along with the neck bolts there are screws for adjusting the height of the twin lipstick single-coil pickups, which retain their authentic two piece casing – a nod back to when they were culled from actual lipstick cases in the 1950s. This time, though, the pickups are hotter Alnico loaded units.

Access to the guitar’s electronics is achieved by removing a cream formica disc that covers the circular entrance to the body cavity. This is secured with one small screw into a floating section of hardboard inside the cavity and, while it is simple and quick to access, we found it rather fiddly to replace to say the least. Inside the chassis, the somewhat rudimentary construction of these guitars is visibly evident, with a laminate block frame supporting the masonite (hardboard to all intents and purposes) top and back sections. Evidently, this is no solid mahogany blues machine, so we were keen to see how the construction translated into the amplified arena.