MusicRadar

A Brady snare is an object of beauty.

1 of 7 » View in gallery

• Review
• Manufacturer's Description

These five stunning Australian Brady snares have the same dimensions (14"x61/2") and fittings. Where they differ is in the construction and the species of timber used for each drum. Two are of ply construction while the other three are made from solid, vertically arranged blocks, half an inch thick.

Each drum has ten of Brady's custom double-ended pipe lugs, machined from solid brass. They are heavier than most tube lugs and, along with the rigid, super-hoop 2.3mm rims, considerably increase the overall weight of each drum. The stainless steel tension rods have metal washers sandwiched between two leather, shock absorbing washers to avoid metal-to-metal contact and to hold the tuning firm.

All the drums are supplied with Remo CS Coated Black Dot batters and Ambassador Hazy snare sides.

Taking the strain

Brady employs the popular nickel Drumworks piston strainer, a top quality, smooth operator. In fact, this clear version of the strainer was designed in conjunction with Brady. The chromed piston is encased in a clear moulding with a matching lever that is strong and silent.

Both the strainer and the butt end have solid chromed blocks that pull the snares well away from the drum, helping the snare to lie flat. Each drum has a proper snare bed of 1.5mm depth and the 20-strand wires are custom made for Brady using specially tempered German wire.

Exotic horizontal plies

The shells are all beautifully finished inside and out with 45º bearing edges. Brady's enviable reputation is based on the use of Australasian desert hardwoods which are harder than the familiar maple and birch of western drums. The ply construction drums are about ¼" thick, without reinforcing rings, and are unlike anyone else's as they are not cross laminated.

Instead, all the plies are laid horizontally, glued and bent in a dry mould. They are guaranteed perfectly round for life. Because all the plies run in the same direction and the glue welds the shell into a solid whole, the drums produce a sound quality very close to that of single-ply solid shell drums.

All Brady's ply drums have 10 plies, which may or may not include a special outer face veneer. For example, the jarrah ply drum has a single outer ply of brush box, while the marri ply drum is all marri, including the face veneer. The first review drum is made from jarrah ply with a brush box gloss finish, which features a wide, swirling grain varying between light and mid-brown.

The other ply drum is natural satin finished marri and is a muted golden beige with streaks of dark brown, reminiscent of an exotic animal pelt.

Jarrah ply is Brady's most popular and versatile choice. It has a good balance of attack, body, warmth and depth. It also sounds great whether it is tuned high or low. The marri ply drum is a bit more toppy. It seems a little faster, but not quite so fat, and is marginally brighter. It is a recent addition to the Brady stable and they have so far mainly used it with smaller be-bop kits. However, at 6½" this one's hardly a be-bop drum. We imagine if you're into more edgy, nimble music this would work well.