MusicRadar

The all-maple kit sits in the middle of the PDP range, but aims near the top

1 of 4 » View in gallery

• Related News
• Review

Pacific Drums and Percussion (PDP) is the budget-conscious little brother of Drum Workshop (DW), which started out in 2000. Nine years down the line, PDP is established as a respected line in itself with its own image - and although destined always to be second to DW, the PDP range now includes drums, such as today's M5, which would not disgrace the loftiest of stages.

The M5 is an all-maple kit which sits in the middle of the PDP range, but with ambitions to be nearer the top.

Build

The M5 has seven-ply shells made up of a two-ply outer and inner with a three-ply core. The maple is sourced 'overseas', i.e: it's not the American rock maple associated with PDP's Platinum series, but then you wouldn't expect it to be at this price. The grain is unspectacular, but that hardly matters as it's largely hidden by the relatively dark lacquered finish.

"The PDP range now includes drums, such as today's M5, which would not disgrace the loftiest of stages"

Inside, the shells are carefully sanded with a clean, vertical butt join. The impressively sharp and level bearing edges are 45 degrees with a single-ply 45 degree cut to the outside. Impressive quality again for the price. The smaller shells are accurately round to within just a single millimetre, the bass drum within three millimetres.

The lacquering is of a good standard, not quite so glassy as a top finish on a pro kit, but not far off either. There are just four colour choices, two bursts and two fades, applied over a solid base coat.

The M5 comes as a complete five-piece shell pack and PDP offers equally fine and attractively priced hardware packs to complete your kit. The review kit, in Tobacco Burst, is seen here with the 8.155 hardware pack (not reviewed).

There's just the one snare option - a wood shelled 14"x5" with eight double-ended oval lugs. The toms are described, rather confusingly, as 'fast' sizes, i.e: shallow rather than deep, although we'd describe 10"x8" and 12"x9" as standard depths. The bass drum is 22"x18", admittedly almost 'fast' by today's trends, but we wouldn't call this shallow either. It's more than deep enough and particularly if you're trading up from a standard 14" or 16" deep starter kick.

PDP has gone with the two-up/one-down configuration rather than the more trendy one-up/two-down. Presently there is only this single five-shell pack, which obviously keeps shipping/packing requirements simple, contributing hugely to the competitive price. You can, though, buy add-on 8"x7" or 16"x14" toms, or a second 22"x18" bass drum.

Buying any of the drums as one-offs is significantly more expensive than buying the complete, pre-configured kit.

The two small toms are mounted in the traditional manner on the bass drum. There's a sturdy central 'T' post, which penetrates the bass drum shell, and two ball-clamp 'L' arms. Each arm supports its tom via the distinctive and unobtrusive DW suspension tom mount (STM). This works by encircling and gripping four of the upper, oval lugs.

Everything is isolated by impressively thick rubber gaskets. The double tom mount also has a useful clamp at the front so you can add a cymbal arm, or conceivably even a third small tom.

The knurled tom arms have memory locks, as you'd expect, but the design is frankly puzzling. You see, most memory locks are streamlined to slot perfectly into the tom mount block, but this one doesn't. It sticks out awkwardly, only partially slotting into the recess in the block. We don't get this design, it seems wrong - unworthy of DW/PDP's sparkling reputation for hardware.