MusicRadar

Like most drum ROMplers, SD 2.0 has a kit view.

1 of 2 » View in gallery

• Related News
• Review

The big news with SD 2.0 is that it follows the now industry-standard layout, with separate drum kit and mixer views. If you do feel nostalgic for the original version (dfh Superior), the 'main' super-pad screen or 'classic view' can be selected instead, though Toontrack has done away with the convoluted construction pages.

All kit-building now takes place in the main interface, with microphone bleed levels handled on a fader-by-fader basis in the mixer window – clicking the Bleed selector next to a fader opens up an additional Levels tab.

In terms of kit construction, SD 2.0 includes a few basic layouts, and beyond that you can also augment kits with so-called X-Drums. These are essentially extra instruments that you define and allocate samples and mics to – they then appear in the main kit window with a graphic.

You can have a total of 45 kit positions, including those in the presets list, which is pretty impressive and enables truly monstrous designs.

The mixer

Superior Drummer 2.0's mixer is incredibly well-equipped. With five inserts per channel, 16 routable busses, phase reverse, and mute and solo on all channels, it feels much like a typical DAW.

It's worth mentioning that the mixer retains the Bounce facility. This includes various options for rendering SD 2.0's audio output to a set of individual audio files. Factor in the five Sonalksis-designed effects (filter, gate, EQ, compressor and transient) and you can do much of your sound-shaping within SD2.0.

In typical DAW style, each effect opens its own small window, which floats within SD2.0's mixer page. All five have familiar interfaces, and wouldn't look out of place in Cubase or Logic. Impressively, you can sidechain within SD 2.0's effects using channels and busses.

Although there's nothing immensely complex about any of the effects, in use, the compressor sounds particularly good. It's also nice to see a transient-tweaking processor, as these are great for shaping both close miked hits and drum ambiences.

In terms of sheer power, the filter's Rude setting enables some very aggressive sound-shaping.

New sounds

SD2.0 ships with the first volume of Toontrack's New York Studio Legacy Series library, which was recorded at NY's Avatar Studios (formerly The Power Station) by Pat Thrall, Neil Dorfsman and drummer Nir Z. It's a 60GB library, reduced to 20GB on disk using lossless data compression. There are also three slimmed down installs available, 4GB being the smallest.

With the full install, you get to choose which sticks (sticks, brushes, rods or mallets) and kick beater (wood, plastic or felt) to use. The basic kit comes from US company GMS, but is augmented by additional pieces.

You get three kicks, seven snares (including a Ludwig Black Beauty), three hi-hats, four rides, five cymbal sets, two types of tom and a cowbell. For added variety, the kit sample recordings include some additional microphone options. These were processed at source to retain phase coherence, and include an 1176-processed snare mic and another with Shure Green Bullet-recorded room ambience, processed via a Boogie amp.

Finally, as well as overheads, there are five room mic options, recorded with Coles, U67 and C24 mics, among others. However, given the additional memory required, not all of these load automatically, even when you fire up the full kit. Once we got the hang of this, the level of variety available – even before we reached for the onboard effects – became apparent.