Vous consultez actuellement la version originale de l'article de MusicRadar.com. Une traduction en français sera bientôt disponible.
13 Propellerhead Record mixer tips
Propellerhead Record's mixer is a bit special, being inspired by SSL's 9000K, one of the most revered studio consoles in recording history. In fact, if you already own Reason, you might argue that it's worth buying Record just to get your hands on it.
If you don't give the mixer some serious attention, though, you might never know what a powerful tool you have at your disposal. Here are 13 ways you can make it do more for you.
1. Find your own path
Experiment, explore and experiment some more! Until you set aside plenty of time to get to know the mixer, front and back, you won't be getting the most out of this powerful tool. And don't forget to check out the Audio, Mix and Master units in the rack, too!
2. Into the mixer
For all its presence and power, the Main Mixer is just another device, albeit one with plenty of bells and whistles, and one that can only appear once in your project. So if you aren't worried about using its handy Control Room output, you can place whatever you want before or after it in the signal path, including other sub-mixers, should you feel the need.
3. Send for help
Don't forget, you can send and/or split the signal from a channel, then route it back into another channel or device, should you so desire. This can be useful for such things as sidechaining, parallel processing (layering the dry signal alongside a compressed one, New York style, for example) or maybe even driving a vocoder.
4. Route finder
Reason and Record share a crucial selling point - their ability to have so many signal types routed to so many places. A great example of this is the CV output from the sidechain section, enabling the sidechained compressor's actions to control other devices that accept CV input. This could be anything from the volume on another device or channel, to a filter's cutoff frequency.
5. De-ess to impress
You can achieve the classic de-essing effect by sending the signal of a sibilant vocal into the sidechain input on its own channel, engaging the Filter to Dynamics button and using the filters to accentuate the top end and cut the bottom, so only the sibilance triggers the compressor. You can even try placing another EQ into the signal path to really isolate the frequencies to be quietened.
6. Chain reaction
One of the most under-appreciated features in any DAW is the ability to save channel strips - or, in the case of Record's Main Mixer, insert effects configurations. You wouldn't expect to have to add a fader, level meter and gain pot to every channel by hand when you start a new project, so why not extend the concept to include some standard starting FX chains, ready at the push of a button.
7. Custom shop
Just as Reason and Record's famous Combinator offers assignable front panel controls, so too do the mixer channel strips (assigned in the corresponding rack units). These are just the ticket for making regularly tweaked parameters readily available, particularly when using custom insert effect channel strip presets.
8. Come together
When combining drums, vocals or other layered sounds, it always helps to create a sub-mix, and this is very easy to do with the Main Mixer. Simply route the Direct Outs to a 6:2 or 14:2 mixer (or even a Spider Merger), then send the output of the sub-mixer back into a new Mix track in the Main Mixer. You can now set relative values and process all the parts combined.
9. Professional help
Have a go at reverse engineering the Record demo songs and take a look at how these professionally produced tracks have been mixed, and the kinds of routings and combinations of effects that have been used.
10. Separate lives
You can use the same sub-mix principle when recording - to mix down the inputs from separate microphones, for example. Much of the reason for doing this in the past was limited resources, though, and while there is still value in printing a good multichannel take to one track (it can push things along nicely), these days we tend to capture parts separately, enabling later processing.
11. Get out more
There are plenty of reasons why you might want to send a signal to an external output rather than the mixer - whether it's when recording, using external FX, ReWiring, mixing externally or using a summing bus - and this is when the Main Mixer channel strip Direct Outs come in very handy. Simply route one to the desired output.
12. On the level
One of the few things people really miss about using a hardware mixer is the ability to adjust more than one level at a time. If you've never had the pleasure, and have a control surface with multiple faders, use Record's extensive hardware mapping functions to assign them to channels in Record's Main Mixer.
13. Distant echoes
The Pre-fader FX send feature can be great for special effects. Try lowering the fader on a channel (or channels) and listening as the sound of a reverb stays loud while the signal fades. Done well, the sound source will appear to be moving into the distance.
Liked this? Then try:
Propellerhead Record: 12 things you must know
26 seriously useful Reason mixing tips
Sign up for our free weekly newsletter
The free MusicRadar newsletter serves up the week's biggest artist and product news stories alongside exclusive tuition and gear reviews. Sign up here!
Follow MusicRadar on Twitter
Get instant updates and bonus content plus chat with the team. Start here!